Cyclades AlterPath BladeManager Manuál s instrukcemi Strana 54

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 240
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 53
40 MergePoint 5224/5240 Service Processor Manager Installer and Administrator Guide
For example, when failover is set, the ifconfig command lists bond0 along with eth0 and eth1 as
shown in the following screen example. Note that the HWaddress [MAC address] and inet addr [IP
address] are identical for bond0, eth0 and eth1.
[root@ONB /]# ifconfig
bond0Link encap:Ethernet HWaddr 00:60:2E:00:4F:97
inet addr:172.20.0.131 Bcast:172.20.255.255 Mask:255.255.0.0
eth0Link encap:Ethernet HWaddr 00:60:2E:00:4F:97
inet addr:172.20.0.131 Bcast:172.20.255.255 Mask:255.255.0.0
...
eth1Link encap:Ethernet HWaddr 00:60:2E:00:4F:97
inet addr:172.20.0.131 Bcast:172.20.255.255 Mask:255.255.0.0
Ethernet media configuration
Administrators may configure a specific speed for the public Ethernet interfaces. The default is
Auto Negotiation.
For more information, see the following sections:
Configuring Network Interfaces in the Wizard on page 62
To configure the network interfaces (Wizard): on page 63
Table 4.11 shows the values to use when configuring network interfaces.
Table 4.11: Network Interfaces Configuration Values
Settings Notes
Host name Default: MergePoint<model_number>, for example MergePoint5224
Domain name Domain name used on the domain name server (DNS)
Primary DNS server IP address for a primary DNS server on the same subnet as the SP manager
Secondary DNS server IP address for an optional secondary DNS server on the same subnet as
the SP manager
Failover Selecting enabled from the pull-down menu configures failover from the primary to
the secondary Ethernet port if the primary port goes down
Zobrazit stránku 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 239 240

Komentáře k této Příručce

Žádné komentáře