Cyclades AlterPath BladeManager Manuál s instrukcemi stáhnout pdf (Strana 119)

Chapter 5: Using the Web Manager 105

By selecting the Network - VPN connections menu option, the administrative user can perform the

following tasks on the SP manager:

• Configure one or more IPSec VP connections.

• Configure a single PPTP VPN connection with a pool of IP addresses.

Table 4.10 on page 37 describes the fields for configuring a PPTP profile. Specify a pool of

addresses in the form 10.0.0.100

-110.

To configure IPSec VPN:

1. Select the Network

- VPN connections menu option.

2. Click Add new connection.

3. The IPSec VPN Connection Configuration dialog appears.

4. Enter any descriptive name you choose for the connection in the Connection name field.

5. Select either ESP or AH from the Authentication protocol pull

-down menu.

6. Select Shared Secret or RSA public keys from the Authentication method pull

-down menu.

7. If Shared secret is selected, enter the shared secret in the Pre

-Shared key field.

8. Set up the right and left hosts by performing the following steps.

a. Enter the name of the SP manager (left host) or the remote computer (right host) in the

ID field.

b. Enter the IP address of the SP manager (left host) or the remote computer (right host) in

the IP Address field.

c. Enter the IP address of the router through which the host’s packets reach the Internet in the

NextHop field.

d. Enter the netmask for the subnet in the Subnet Mask field.

9. If RSA public keys is selected in step 6, perform one of the following steps.

a. When configuring the left host, generate the key for the SP manager and use copy and

paste to enter the key in the RSA key field.

b. When configuring the right host, find out the key from the remote gateway (where the

right host resides) and enter the key in the RSA key field.

10. Select either Ignore, Add, Add and route or Start from the Boot Action pull

-down menu.

11. Click OK.

12. Click Save and apply changes.

To configure a PPTP VPN connection:

1. Select the Network

- VPN connections menu option.

2. Enter a single IP address or a pool of IP addresses in the PPP local address pool field.

3. Enter a single IP address or a pool of IP addresses in the PPP remote address pool field.

4. Click Save and apply changes.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 239 240

Komentáře k této Příručce

Žádné komentáře

Cyclades AlterPath BladeManager Manuál s instrukcemi Strana 119

Komentáře k této Příručce

Související produkty a manuály pro Servery Cyclades AlterPath BladeManager