Cyclades AlterPath BladeManager Manuál s instrukcemi Strana 18
- Strana / 240
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
4 MergePoint 5224/5240 Service Processor Manager Installer and Administrator Guide
Modem Types and Options
Modems can be connected to the MergePoint 5224/5240 SP manager in one of the two
following ways:
• An external modem can be connected to the AUX port on the back
• A PC modem card can be inserted into a PCMCIA slot on the front
Power Management Unit Options
Cyclades
®
Power Management (PM) Intelligent Power Distribution Units (IPDUs) can be
connected to the AUX port on a MergePoint 5224/5240 SP manager. Any combination of models
of Cyclades PM IPDUs can be daisy
-chained to support management of up to 128 outlets.
After an IPDU is connected to the AUX port, AC
-powered devices of any type can be plugged into
the IPDU. Authorized users can remotely manage power for the target devices after the
administrator performs the following tasks:
• Configures the AUX port for power management
• Configures the outlets on connected IPDUs by specifying names to identify devices that are
plugged into the outlets
• Authorizes users to power up and down devices connected to IPDU outlets
The administrator may also configure notifications of over
-current states to be sent as alarms to
specified users.
Safety Precautions and Other Requirements
Failure to observe the precautions in this section may result in personal injury or damage to
equipment.
Observe the following general safety precautions when setting up and using Avocent equipment.
• Follow all cautions and instructions marked on the equipment.
• Follow all cautions and instructions in the installation documentation or on any cautionary
cards shipped with the product.
• Do not push objects through the openings in the equipment. Dangerous voltages may be
present. Objects with conductive properties can cause fire, electric shock or damage to
the equipment.
• Do not make mechanical or electrical modifications to the equipment.
• Do not block or cover openings on the equipment.
• Chose a location that avoids excessive heat, direct sunlight, dust or chemical exposure, all of
which can cause the product to fail. For example, do not place an Avocent product near a
radiator or heat register, which can cause overheating.
- MergePoint™ 1
- 5224/5240 1
- USA Notification 2
- Canadian Notification 2
- MergePoint™ 5224/5240 3
- Service Processor Manager 3
- Table of Contents 5
- Table of Contents v 7
- List of Figures 11
- List of Tables 13
- Installation Introduction 15
- MERGEPOINT 16
- Modem Types and Options 18
- Power Management Unit Options 18
- -tilt bar 19
- Basic Installation Procedures 21
- Connecting Devices 24
- Advanced Installation Topics 31
- Telephone 32
- Administration Introduction 35
- SP Manager 38
- User and Group Configuration 39
- Security Profiles 39
- Services 41
- Telnet service configuration 42
- Telnet client configuration 42
- DHCP client 42
- DHCP server 43
- IPSec VPN connections 48
- PPTP VPN connections 50
- Manager 52
- Syslog servers 53
- Private Ethernet ports 53
- Public Ethernet ports 53
- Failover 53
- Ethernet media configuration 54
- Dial-in and Callback Access 55
- Power Management Options 57
- Target Device Configuration 59
- 5224/5240 SP Manager 64
- -in chains 69
- Using the Web Manager 71
- Dialogs in the Web Manager 73
- Web Manager Wizard 74
- Configuring routes 76
- Configuring failover 76
- Upgrading IPDU Software 82
- Configuring the AUX Port 83
- - AUX Port menu option 84
- Configuring PC Cards 86
- -down menu on the PCMCIA 88
- -down menu on the 88
- - Date/time menu option 88
- Local boot options 89
- Network boot options 90
- Configuring Outbound Email 91
- # gunzip 92
- Configuring Target Devices 93
- Configuring Users and Groups 95
- Configuring Device Groups 97
- - Authentication menu option 100
- -down menu 100
- 5240 SP Manager 104
- Configuring Notifications 104
- - Notifications menu option 105
- -down menu. If the 105
- Configuring Sensor Alarms 107
- Configuring SNMP 110
- - SNMP menu option 113
- - Host settings menu option 115
- Configuring Hosts 117
- Configuring Static Routes 118
- Configuring VPN Connections 118
- Viewing System Information 121
- - Product upgrades 123
- - Restart menu option 124
- Administration Tasks Not 125
- Performed in the Web Manager 125
- -mounted directory 128
- -t ext2 /dev/hdc1 /mnt/opie/) 128
- -in or Telnet connection: 131
- Configuring the DHCP Server 134
- -q priv0" 136
- -ins Using cli 136
- -flow type to both 137
- -flow both 137
- Configuring Routes With cli 141
- Saving Configuration Changes 142
- saveconf 143
- MergePoint5224 login: root 145
- Password: password 145
- -out] [retries] 150
- Using the cli Utility 157
- Interactive mode 158
- Batch mode 158
- Autocompletion 162
- Enter> 163
- Parameters that can be added 165
- -source <IPaddress>] 174
- Default: no setting 178
- Appendices 179
- Login failure 180
- Web manager stops responding 181
- Firmware image is corrupted 181
- Target device types 183
- Appendices 171 185
- Appendices 173 187
- Using the sptemplate utility 188
- Appendices 179 193
- Appendices 181 195
- Why define private subnets? 196
- Configuring a private subnet 197
- Appendices 189 203
- Appendices 191 205
- Appendices 193 207
- IP: 192.168.4.22 208
- Appendices 195 209
- Appendices 199 213
- Boot file location 214
- Changing the boot image 216
- <N> completed 219
- Appendix E: Technical Support 222
- Numerics 223
- Index 211 225
- Index 213 227
- Index 215 229
- Index 217 231
- Index 219 233
- Index 221 235
- Index 223 237
Související produkty a manuály pro Servery Cyclades AlterPath BladeManager
(202 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.023 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce