Cyclades AlterPath BladeManager Manuál s instrukcemi Strana 151
- Strana / 240
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Chapter 6: Administration Tasks Not Performed in the Web Manager 137
where:
auth1: The first RADIUS authentication server.
acct1: The first RADIUS accounting server.
server: The RADIUS server address.
port: Optional. The default port name is radius and is looked up through /etc/services.
secret: The shared password required for communication between the SP manager and the
RADIUS server.
retries: The number of times each RADIUS server is tried before another is contacted.
time
-out: The default is 3 seconds. How long the SP manager should wait for the RADIUS
server’s response.
To configure groups on a RADIUS authentication server:
1. On the server, open the /etc/raddb/users file for editing.
2. Assign groups to a user in the Framed
-Filter-Id attribute.
3. Use the format Framed
-Filter-Id=:group_name=<Group1>[,<Group2>,..., <GroupN>];, as
shown in the following example.
NOTE: If the Frame-Filter-Id already exists, append the group_name declaration to the string starting with a
colon (:). Make sure a final semicolon (;) is at the end of the declaration, as shown in the example.
4. Save and quit the file.
To configure a RADIUS authentication server on the SP manager:
1. Log into the console as root.
2. Open the
/etc/raddb/server file for editing or create the file.
3. Make an entry for the RADIUS server (auth1), an accounting server (acct1) and if desired,
make an entry for a second RADIUS authentication server (auth2) and for a second accounting
server (acct2), by performing the following steps for each server.
4. Follow the file configuration directions shown in the following example.
groupuser1
Auth-Type= Local, Password =”xxxx”
Service
-Type=Callback-Framed-User,
Callback-Number=”305”,
Framed-Protocol=PPP,
Framed
-Filter-Id=”:group_name=<Group1>[,<Group2>,..., <GroupN>];”,
Fall-Through=No
- MergePoint™ 1
- 5224/5240 1
- USA Notification 2
- Canadian Notification 2
- MergePoint™ 5224/5240 3
- Service Processor Manager 3
- Table of Contents 5
- Table of Contents v 7
- List of Figures 11
- List of Tables 13
- Installation Introduction 15
- MERGEPOINT 16
- Modem Types and Options 18
- Power Management Unit Options 18
- -tilt bar 19
- Basic Installation Procedures 21
- Connecting Devices 24
- Advanced Installation Topics 31
- Telephone 32
- Administration Introduction 35
- SP Manager 38
- User and Group Configuration 39
- Security Profiles 39
- Services 41
- Telnet service configuration 42
- Telnet client configuration 42
- DHCP client 42
- DHCP server 43
- IPSec VPN connections 48
- PPTP VPN connections 50
- Manager 52
- Syslog servers 53
- Private Ethernet ports 53
- Public Ethernet ports 53
- Failover 53
- Ethernet media configuration 54
- Dial-in and Callback Access 55
- Power Management Options 57
- Target Device Configuration 59
- 5224/5240 SP Manager 64
- -in chains 69
- Using the Web Manager 71
- Dialogs in the Web Manager 73
- Web Manager Wizard 74
- Configuring routes 76
- Configuring failover 76
- Upgrading IPDU Software 82
- Configuring the AUX Port 83
- - AUX Port menu option 84
- Configuring PC Cards 86
- -down menu on the PCMCIA 88
- -down menu on the 88
- - Date/time menu option 88
- Local boot options 89
- Network boot options 90
- Configuring Outbound Email 91
- # gunzip 92
- Configuring Target Devices 93
- Configuring Users and Groups 95
- Configuring Device Groups 97
- - Authentication menu option 100
- -down menu 100
- 5240 SP Manager 104
- Configuring Notifications 104
- - Notifications menu option 105
- -down menu. If the 105
- Configuring Sensor Alarms 107
- Configuring SNMP 110
- - SNMP menu option 113
- - Host settings menu option 115
- Configuring Hosts 117
- Configuring Static Routes 118
- Configuring VPN Connections 118
- Viewing System Information 121
- - Product upgrades 123
- - Restart menu option 124
- Administration Tasks Not 125
- Performed in the Web Manager 125
- -mounted directory 128
- -t ext2 /dev/hdc1 /mnt/opie/) 128
- -in or Telnet connection: 131
- Configuring the DHCP Server 134
- -q priv0" 136
- -ins Using cli 136
- -flow type to both 137
- -flow both 137
- Configuring Routes With cli 141
- Saving Configuration Changes 142
- saveconf 143
- MergePoint5224 login: root 145
- Password: password 145
- -out] [retries] 150
- Using the cli Utility 157
- Interactive mode 158
- Batch mode 158
- Autocompletion 162
- Enter> 163
- Parameters that can be added 165
- -source <IPaddress>] 174
- Default: no setting 178
- Appendices 179
- Login failure 180
- Web manager stops responding 181
- Firmware image is corrupted 181
- Target device types 183
- Appendices 171 185
- Appendices 173 187
- Using the sptemplate utility 188
- Appendices 179 193
- Appendices 181 195
- Why define private subnets? 196
- Configuring a private subnet 197
- Appendices 189 203
- Appendices 191 205
- Appendices 193 207
- IP: 192.168.4.22 208
- Appendices 195 209
- Appendices 199 213
- Boot file location 214
- Changing the boot image 216
- <N> completed 219
- Appendix E: Technical Support 222
- Numerics 223
- Index 211 225
- Index 213 227
- Index 215 229
- Index 217 231
- Index 219 233
- Index 221 235
- Index 223 237
Související produkty a manuály pro Servery Cyclades AlterPath BladeManager
(202 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.035 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce