Cyclades AlterPath OnBoard Uživatelská příručka stáhnout pdf (Strana 488)

100

101

Configure>Serial Ports Screens [OSD]

440

AlterPath OnSite Administrator’s and User’s Guide

a. To verify the new server name, select Save.

The KVM Ports selection screen appears with new port alias listed.

- OR -

b. Select the right arrow button to go to the Power Outlet screen.

T To Enable Power Management Through a

KVM Port [OSD]

See “IPDU Power Management (OSD)” on page 382 for background

information, if needed. The prerequisites for this procedure are that you know

the following:

• The number of the AUX port where the IPDU is connected

• The number of the outlet(s) into which the server is plugged that is

connected to the selected port.

You can specify up to two outlets.

1. Go to: Configure>KVM ports, select a Server Name/Port Number, and

then go to Server Name>Active>Power Outlet.

The Power Outlet screen appears with the port alias or number at the top.

2. Type the outlet number(s).

If the server connected to the KVM port is plugged into two different

outlets, you can enter two outlets per port; use a space to separate them.

Enter the outlet number(s) using the format: A:N, where A is the number

of the AUX port to which the PM is connected (either 1 or 2) and N is the

number of the outlet. If more than one IPDU is daisy chained to an AUX

port, specify the outlet numbers incrementally.

3. Select Save.

Configure>Serial Ports Screens [OSD]

An administrative user can select the Serial Ports option on the OSD

Configuration Menu to configure serial ports.

1 2 ... 483 484 485 486 487 488 489 490 491 492 493 ... 687 688

Komentáře k této Příručce

Žádné komentáře

Cyclades AlterPath OnBoard Uživatelská příručka Strana 488

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cyclades AlterPath OnBoard