Cyclades AlterPath OnBoard Technické informace stáhnout pdf (Strana 320)

100

101

Configuring Private Subnets and Virtual Networks

280 AlterPath OnBoard Administrator’s Guide

Internet via the OnBoard’s public IP address. Any number of private subnets

may be configured.

Note: The OnBoard attempts to reach a device that does not have a private

subnet assigned by attempting to contact it through the OnBoard’s default

route. Therefore, unless the OnBoard administrator defines a public subnet

and assigns it to each device, the device cannot be reached unless the device is

on the public side of the OnBoard. In almost all cases, devices are on the

private side of the OnBoard and therefore they are unreachable without a

private subnet.

When an administrative user clicks the “Add Subnet” button on the Network

→ Private Subnets Screen, the “Private Subnet configuration” dialog appears,

as shown in the following screen example.

Figure 8-15:Network → Private Subnets: Add Subnet Dialog

A subnet is defined by configuring the following:

Table 8-5: Fields on the Private Subnet Configuration Dialog

Field Definition

Private subnet name Any meaningful name chosen by the administrator.

OnBoard side IP

address

Devices use this address when communicating with the

OnBoard. The OnBoard uses this address when communicating

with devices. This address must be within the private subnet’s IP

address range)

Subnet mask Used to define the range of addresses available on the subnet

1 2 ... 315 316 317 318 319 320 321 322 323 324 325 ... 501 502

Komentáře k této Příručce

Žádné komentáře

Cyclades AlterPath OnBoard Technické informace Strana 320

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cyclades AlterPath OnBoard